Servo Control „Monitor - Reely HCP80 3D RtF Notice D'emploi

m) Servo Control „MONITOR"
In this menu you can graphically display the servo control settings for all 6 channels and simultaneously check the
individual control functions with all mixers. Especially with helicopter models you can easily very quickly make mixer
errors for swash plate control.
Proceed as follows to display the servo control:
• Call the function settings menu.
• Select the menu item „MONITOR ADJ" with the buttons „UP"
or „DOWN".
• Activate the menu item with the button „SELECT".
The display shows the 6 channels in the current position of
the encoders.
If you move the control sticks, activated switches or toggle
switches in different directions now, you will see precisely
which servo is deflected in which direction.
• Push the button „CLEAR" to get back into the overview of the
function setting menu.
116
Figure 48