Instructions for Use
IPS® Implants Forearm Reconstruction
Ulnopalmar access
The skin incision, 9 – 11 cm in length, lies above the ulnar edge between the olecranon and the ulnar styloid
process. The ulnopalmar access ensures reliable soft tissue coverage after the surgical procedure.
Exposure of the ulna
After the incision of the fascia, blunt entry between the extensor muscle and the flexor carpi ulnaris; then
only the extensor carpi ulnaris muscle or anconaeus muscle is pushed off in the proximal third in front of
the dorsal ulnar surface.
Access to the radius according to Thompson, Henry or Boyd
Depending on the preoperative planning and the later position of the IPS® Implants Forearm
Reconstruction implant based on the case report, one of the three accesses according to Thompson, Henry
or Boyd is selected.
Positioning and use of the drill and marking guide on the ulna
The drill and marking guide is aligned with the ulna as defined in the pre-operative planning and illustrated
in the case report, and provisionally fixated using Kirschner wires. An image converter check is performed
to confirm the correct position of the drill and marking guide, and to correct it if necessary. In the next step,
the holes are pre-drilled with the drill and marking guide and using the respectively appropriate drill
bushing:
Screw diameter
2.5 mm
3.0 mm
Then the saw cut is marked on the drill and marking guide using an oscillating saw. The Kirschner wires and
the drill and marking guide are removed.
Revision 1
Drill guide
26-166-25-07
26-166-27-07
Color-coding
Purple
Orange
39