Printout And Job Record; Set-Up And Maintenance; Vehicle Adjustments; Service Programs - Corghi EXACT BlackTech X Plus Manuel D'utilisation

Databank selection Selection of the
databank archive from which the vehicles will
be selected.
Main databank Sets the main archive
supplied by CORGHI as the databank for use.
User databank Sets the secondary ar-
chive entered by the user as the databank for use.
Both databanks Sets the combina-
tion of the main and secondary archives as the
databank for use.

Printout and job record

Print Prints the data.
Save and print Saves the current
job in the jobs archive and prints the data.
Save job Saves the current job in the
jobs archive.
Compile job record Recalls compilation
of the job record data.

Vehicle adjustments

Copy Starts copying of the vehicle
adjustment help function.
Pause Stops copying of the vehicle
help function and restarts it from the same point.
Stop Stops playback of an animation,
returning to the first image (only applies to ani-
mations, not to stationary images).
Front toe Selects the front toe adjust-
ment help function.
Rear toe Selects the rear toe adjust-
ment help function.
Operator's manual EXACT BlackTech X Plus
Front camber Selects the front camber
adjustment help function.
Rear camber Selects the rear camber
adjustment help function.
Front caster Selects the front caster
adjustment help function.
Front king pin Selects the front king
pin adjustment help function.
Toe curve adjustment Selects the toe
curve adjustment help function.
Toe curve measurement Selects the
toe curve measurement help function.

Set-up and maintenance

Demo Vehicle wheel alignment proce-
dure is executed in demonstration mode; use of
targets not required.
Set-up Recalls the aligner set-up
procedure.
Save data Procedure for saving or re-
freshing the job archive and the user databank.

Service Programs

Test Target diagnostics instruments.
Software update Wheel aligner and/or
main databank software update.
Technical assistance Service pro-
grammes restricted to technical assistance.
Exit to Windows Exits to the operating
system. A password must be entered in order to
access the operating system.
EN
53