Publicité
4.15 ADDITIONAL PRECAUTIONARY REQUIREMENTS
CAUTION
Ensure that all personnel involved in the maintenance and use of the product are properly trained and
instructed in the correct safety and operating procedures.
Ensure that all personnel are aware of the residual risks present and indicated in par. 4.13
CAUTION
Never carry out maintenance on the product while it is running.
CAUTION
Ensure that all safety devices are connected and in good working order. Never modify or bypass any of the
safety devices.
CAUTION
When the tool is not in use, turn off the ON/OFF switch to avoid unnecessary battery consumption and/or
component deterioration.
CAUTION
The product must be inspected before use and in any case after events such as: dropping or impact in order
to identify any damage.
CAUTION
Do not use the product indoors or in a potentially explosive environment.
-
The product may only be used by a properly trained and instructed operator who has read and
-
understood this manual.
Do not insert foreign objects into moving parts.
-
Always wear adequate and suitable personal protective clothing for the work to be carried out. Clothing
-
must be close-fitting to the body. Avoid wearing ties, necklaces or long untied hair that could get caught in
moving parts.
A person under the influence of alcohol or taking drugs that reduce alertness or reflexes is not authorised
-
to use or interact with the product, nor to carry out maintenance or repair work.
The user is responsible for dangers or accidents to other persons or their property in the event of use not
-
in accordance with the instructions in this manual.
It is forbidden to move between the different cutting positions, with no-load operation, by pressing the
-
control lever.
To safeguard the operator's safety and avoid possible damage, it is essential to have read and understood
-
the entire use and maintenance manual before carrying out any work on the product. The purpose of these
instructions is to describe the operation of the product and its safe use as well as the correct conditions in
accordance with the regulations in force.
Following these instructions helps avoid dangerous situations, reduces repair costs and extends the life-
-
span of the product. This manual must be intact and legible in its entirety.
4.16 GENERAL NOTES ON CONDUCT
The personnel in charge must take care of their own health and that of the other workers present in the workplace,
in accordance with the training, instructions received and the means and resources made available by the employer
(or manager), and comply with the requirements in force as well as the information in this manual.
Behaviour is the result of three factors:
0310.0429_00
95
Publicité
