Publicité
Characteristics of the adhesive/sealant used
The adhesive data sheet in this section only contains the main technical characteristics required for purchase, but
not the safety information related to its use.
Before use, request the 'product safety data sheet' from the manufacturer, which can also normally be found on the
supplier's website.
The manufacturer prescribes the use of LOCTITE ® adhesive/sealant.
The adhesive enables maintenance personnel to prevent persistent equipment failures that cause unscheduled
downtime.
The manufacturer prescribes the use of 'LOCTITE® 270™': high-strength threadlocker formulated to lock and seal
screws and/or bolts to prevent loosening due to vibration.
Tolerates light contamination by industrial greases/oils, e.g. cutting oils. It can be disassembled by heating up to
300°C.
The main features:
High-strength threadlocker for maximum effectiveness
Prevents loosening of vibrating parts such as pumps, gearboxes or presses
Tolerates light contamination by industrial oils, e.g. cutting oils
Excellent on any metal, including passive materials (e.g. stainless steel, aluminium, galvanised surfaces)
It can be disassembled by heating up to 300°C.
LOCTITE® 270™ has the following characteristics:
Technology
Chemical nature
Appearance
Fluorescence
Components
Viscosity
Cross-linking
Secondary polymerisation
Mechanical strength
The manufacturer prescribes the use of "LOCTITE® 243™": a medium-strength threadlocker designed for the
locking and/or sealing of threaded fasteners requiring normal disassembly with standard hand tools.
Tolerates light contamination by industrial greases/oils, e.g. cutting oils. It can be disassembled by heating up to
250°C.
The main features:
Prevents loosening of vibrating parts such as pumps, gearboxes or presses
Tolerates light contamination by industrial oils, e.g. cutting oils
Excellent on any metal, including passive materials (e.g. stainless steel, aluminium, galvanised surfaces)
It can be disassembled by heating up to 250°C.
LOCTITE® 243™ has the following characteristics:
Technology
Chemical nature
Appearance
Fluorescence
Components
Viscosity
Cross-linking
Secondary polymerisation
Mechanical strength
For further technical details see the LOCTITE® data sheet available on the supplier's website.
0310.0429_00
Acrylic
Dimethacrylate ester
Green liquid
Fluorescent under UV light
Single component does NOT require mixing (which is not permitted)
Low
Anaerobic
Activator
High
Acrylic
Dimethacrylate ester
Blue Liquid
Fluorescent under UV light
Single component does NOT require mixing (which is not permitted)
Medium
Anaerobic
Activator
Medium
118
Publicité
