Publicité
Pos.
Denomination
25
Handle
26
Operating lever
27
Lower extension pole
Extension pole clamp
28
lever
29
Upper extension pole
30
Shear clamp
31
Screw clamp
32
Female connector
33
Battery protections
Follow the steps below to assemble the shear on the extension pole:
1) Unscrew the screws (31) on the clamp (30) and remove the left cover.
2) Slightly pull out the connector (32) at the end of the cable and insert the shear.
3) Place the shear inside the clamp (30), close the cover and tighten the screws (31) to secure the shear
firmly;
4) Insert the battery (7) into the guides at the rear of the handle (25).
5) To adjust the pole extension, open the lever (28).
6) Slide the upper extension pole (29) to the desired length and lock it firmly in place by closing the lever
(28).
0310.0429_00
Function
To handle the extension pole
Pressed to operate
Grips and supports the extension pole
To lock the extension pole and adjust the length
Adjustable part to increase/decrease overall length
Allows the shear to be inserted
To lock the shear in the clamp
Allows the shear to be connected to the extension pole cable
Protect the battery from accidental shocks
101
Publicité
