Publicité
CAUTION
If there is no symbol of the crossed out waste bin on the machine, it means that its manufacturer is not in
charge of its disposal. In this case, the regulations in force about waste disposal always apply.
4.11.1 BATTERIES
Pursuant to Legislative Decree 188/2008 Italian transposition of Directive 2006/66/EC on batteries/battery packs
and related waste.
The crossed-out wheelie bin symbol on the product or its packaging indicates that batteries, at the end of their
useful life, must be collected separately from other waste in order to allow proper treatment and recycling. The user
must therefore return the end-of-life equipment free of charge to the appropriate municipal separate collection
centres for electrical and electronic waste, or return it to the seller.
In addition to the symbol, batteries, accumulators and button cells containing more than 0.0005% mercury
(chemical symbol Hg), more than 0.002% cadmium (chemical symbol Cd) or more than 0.004% lead (chemical
symbol Pb) are marked with the chemical symbol for the respective metal.
The adequate separate collection of spent batteries and the following processing and eco-friendly disposal avoid
negative effects on health and the environment and allow recycling and/or reuse of the materials they are made of.
Unauthorised disposal of batteries, cells and accumulators by the user shall result in the application of penalties in
accordance with current legal regulations.
In the case of a battery contained in the 'appliance', and where the battery can be easily removed by the user, please
note that it is a mandatory requirement to comply with current legislation that the battery must not be disposed of as
municipal waste (Directive 2006/66/EC), being subject to separate collection to avoid damage to the environment.
The user must therefore return the spent battery-accumulator free of charge to the appropriate municipal separate
collection centres for electrical and electronic waste, or dispose of it in the containers provided at the points of sale.
4.12 SAFETY DEVICES APPLIED TO THE PRODUCT
The product is equipped with the following safety devices.
FIXED GUARD
REMOVABLE GUARD
DEVICE AGAINST ACCIDENTAL START-UP
4.12.1 FIXED GUARDS
Fixed protections consist of fixed guards and/or casings installed on the product, whose function is to prevent
access to internal parts or moving parts during the operating cycle.
where no protection is possible because of the specific function of the equipment.
Placed in restricted access areas during maintenance, they require specific tools for their removal.
Fixed guards are the protective shells of the product's mechanics, which also include protection of the operating
lever against unintentional activation of the product (shocks, dropping the product, etc.)
DANGER
It is absolutely forbidden to operate the product, following maintenance, without properly reinstalling the fixed
guards, as well as to use it without them.
It is strictly forbidden to tamper with the product by attempting, by any means, to circumvent a fixed protection
by taking advantage of possible indirect passages due to but failed or partial repositioning of protections or
where all fixing screws have not been repositioned as originally intended by the manufacturer.
NOTE
Periodically check the integrity of the fixed guards and their fixings, paying particular attention to the access
guards to the product mechanics.
0310.0429_00
SAFETY DEVICES ON THE PRODUCT
With the exclusion of the cutting blade area
89
Publicité
