Publicité
(*) The CE marking relates to the shear product and takes into account all possible combinations of accessories
that can be supplied and are permitted with the shear and as described in section 2.3.
IMPORTANT!
To properly identify the product, refer to the type, serial number and year of manufacture shown on the
identification plate and quote them to CAMPAGNOLA S.r.l. for any service. assistance or spare parts
request.
IMPORTANT!
The CE marking is unique and it certifies the conformity of the product with the machinery directive and
the other applicable directives in compliance with the conditions prescribed and shown in this manual.
With a
machine/product consisting of several parts, a CE plate/label is affixed to the product and an
identification label on the main unit (e.g. ATRA.xxxx) to identify it.
IMPORTANT!
The customer is in charge of checking the integrity of the CE plate/label.
The user must replace the CE and/or warning plates which become illegible due to wear.
It is strictly forbidden to remove the plates/labels on the product.
CAMPAGNOLA S.r.l declines any responsibility on the safety of the product in case of non-compliance with
this prohibition.
The CE marking is placed on the product as shown in the following figure.
0310.0429_00
Fax Simile of the CE plate shown below (*)
85
Publicité
