Télécharger Imprimer la page

CAMPAGNOLA NOVA 35 Manuel D'utilisation Et D'entretien page 92

Masquer les pouces Voir aussi pour NOVA 35:

Publicité

4.13.5 BLINDING
Risk present at all stages of use and during maintenance and cleaning.
When working with the product, it is absolutely forbidden to stand in the vicinity of the cutting head so as to
avoid the risk of projecting objects and fragments of the process.
When using and cleaning the product, personnel must wear appropriate protective goggles.
CAUTION
The use of eye and face protection is mandatory.
4.13.6 FALLING, PROJECTING OBJECTS
Avoid leaving work tools and objects unattended, even temporarily, to prevent them from falling or being
ejected
During use and/or maintenance activities, avoid pointing the cutting or harvesting head at others or at
yourself to avoid the risk of projection of processing residues and/or lubricants.
During cutting or harvesting activities, there may be a risk of the product being dropped and/or thrown
(cutting or harvesting).
CAUTION
The use of face (protective shield) and body protection is mandatory for all operating and maintenance
personnel.
4.13.7 SLIPPING
Any leakage of lubricant due to blade lubrication can cause the personnel in charge of use and operation to slip.
Risk also present in the case of non-compliance with requirements/conditions of use.
In order to avoid the risk of slipping, the product should only be used from the ground in a safe and stable position,
ensuring perfect and stable balance during use and handling.
CAUTION
Access these areas with non-slip shoes and keep them clean at all times. Carry out periodic inspections
according to use.
NOTE
The conditions of the work site (slope, surface, etc.) are not taken into account in this risk, please refer to
paragraphs 3.1 and 3.2 for the additional requirements given, remembering that it is the user's responsibility
to carry out a risk assessment of the work site and the correct conditions of use of the product.
4.13.8 WHIPLASH EFFECT
Beware of kickback and upward bouncing movements generated by tools during cutting operations. They
may cause the operator to lose their balance or control of the product
Pay due attention to the whiplash effect that could be generated by accidentally cutting the vineyard wire.
4.13.9 TRIPPING
The haphazard storage of material in general may constitute a tripping hazard and partial or total restriction of
escape routes in case of need.
Ensure that operating, transit and escape routes are free of obstacles and comply with current regulations.
0310.0429_00
92

Publicité

loading

Ce manuel est également adapté pour:

Nova 40