Publicité
It is essential that the form above is filled in for each maintenance activity, which must then be kept by the person in
charge of maintenance in a specific binder.
The data to be stated on the sheet are:
1)
Product
2)
Model
3)
Serial number
4)
Date of manufacture
5)
Date of intervention
6)
Type of intervention
7)
Maintenance performed
Operator's signature
8)
9)
Notes (operator intervention notes)
10)
Next intervention date (frequency)
DANGER
Maintenance operations must be carried out with the frequency listed in the next chapter.
Since this is a hand-operated product, it is a mandatory requirement to carry out maintenance at the times
prescribed by the manufacturer and to record maintenance activities on the above-mentioned sheet or similar
system for traceability and registration purposes.
7.3.2 LIST OF MAINTENANCE ACTIVITIES AND FREQUENCY
The table below shows the maintenance tasks, with their frequency:
Check the total integrity of the product.
Check blade lubrication.
Check blade sharpness.
Check that the board contacts are undamaged and clean.
Check the integrity of the guards.
Check that all screws are tightened correctly
Remove cutting debris from the blades.
Check blade wear.
Periodic overhaul to be carried out at a Manufacturer's
Technical Assistance Centre (T.A.C.)
Check battery efficiency
Check correct lubrication of the gears
For details on the operating modes, please refer to this manual and in particular to par. 7.1 and 7.2.
With regard to any trade components installed on the product and for which specific documentation has been
provided, reference must be made to the aforementioned documentation for all activities.
0310.0429_00
MAINTENANCE
ROUTINE
X
X
X
X
X
X
X
X
X
X
X
X
X
116
EXTRAORDINARY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Publicité
