Publicité
•
Checking the connection terminals and their status.
The maintenance technician must ensure that all contacts are intact, do not show oxidation, are not
bent/chipped/missing and/or covered with impurities and material that may diminish or alter contact.
•
Checking the tool-side connection terminals
The maintenance technician must ensure that all contacts are intact, do not show oxidation, are not
bent/chipped/missing and/or covered with impurities and material that may diminish or alter contact.
•
Checking the connection terminals on the battery charger side and complete functioning, as indicated in
the instructions supplied with the charger.
The maintenance technician must ensure that all contacts are intact, do not show oxidation, are not
bent/chipped/missing and/or covered with impurities and material that may diminish or alter contact.
For all other verification conditions to be carried out, please refer to the specific battery/battery pack and/or charger
documentation.
7.3 MAINTENANCE PLAN
The maintenance activities of the product have been organised as indicated in this manual.
They originate partly from the maintenance activities to which the product is traditionally subjected, and partly
from the experience of CAMPAGNOLA S.r.l.'s service centres.
This makes it possible to include product-specific differences in a single document.
NOTE
Preventive and specialised maintenance operations (routine and extraordinary) can be carried out, according
to the instructions in the manual, by the user Customer or by CAMPAGNOLA S.r.l.'s Authorised Assistance
Centres.
CAUTION
The maintenance operations described below are to be carried out with the product stationary and power
switched off.
7.3.1 COMPILATION CRITERION
It is essential that the form (or equivalent system) below be filled in completely for each maintenance activity, which
must then be kept by the person in charge of maintenance in a specific binder.
0310.0429_00
115
Publicité
