Pit Boss PRO Serie Manuel De L'utilisateur page 12

12. INSTALLING THE COOKING COMPONENTS
Parts Required:
1 x Top Cooking Rack (#1)
1 x Middle Cooking Rack (#2)
1 x Griddle (#3)
4 x Cooking Grids (#4)
Installation:
• Choose a desired main cooking surface: two Cooking Grids with the
Griddle (shown in 12A) or four Cooking Grids (shown in 12B). Place the
chosen combination of cooking surface on the lower grid ledges inside
the Main Grill.
• Next, place the Middle Cooking Rack on the middle ledges inside the
Main Grill. Place the Top Cooking Rack on the top ledges inside the
Main Grill.
NOTE: To maintain the searing and grilling performance of your
Cooking Grids and Cooking Racks, regular care and maintenance is
required.
13. MOUNTING THE RACK HANGER
Parts Required:
1 x Rack Hanger (#10)
Installation:
• Secure the Rack Hanger to the back panel of the Main Barrel using
the pre-assembly two screws. Cooking Racks can be hung on the Rack
Hanger while not in use.
14. PLACING THE GREASE BUCKET
Parts Required:
1 x Grease Bucket (#16)
Installation:
• Place the Grease bucket on the spout hook on the end of the Main
Barrel. Ensure it is level to avoid grease spills.
• The unit is now completely assembled.
12
12A
12B
13
14
16
1
2
4,3,4
1
2
4,4,4,4
10