Corghi Artiglio 500 Manuel D'utilisation page 60

➥ Bends in hoses.
➥ Replace valve.
➥ Check tightness of slide pivot.
Faulty piston or seals.
➥ Replace pistons and seals.
Incorrect release valve setting.
➥ Adjust vent regulators on control valve.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥ Renew pressure gauge.
Control out of operation.
➥ Check pedal unit.
Rises slowly or has insufficient force.
➥ Check for bent hoses.
➥ Adjust vents on pedal unit.
➥ Replace the valve on the wheel lift control unit control device.
Cylinder leaking air.
➥ Replace cylinder gasket.
➥ Replace cylinder.
Avoid personal injery or death.
The "Spare parts" handbook does not authorise the user to carry out any work on
the machine other than the operations specifically described in the User Manual,
and is only intended to enable the user to provide the technical assistance service
with precise information in order to minimise response times.
60
Locking arm cylinders leak air
The column tilts violently or too slowly
The wheel lift is not working
WARNING
Artiglio 500 User Manual