Corghi Artiglio 500 Manuel D'utilisation page 49

Mounting the bottom bead (Fig.38)
A - Place the bottom bead
of the tyre underneath
the tool and at the same
time apply a little pres-
sure to the tyre by hand
while starting to rotate
the wheel (pedal
for easier bead insertion.
B - Rotate until tyre mount-
ing is complete.
Positioning the top bead (Fig.39)
- Position the top bead of the tyre as clearly
shown in fig. 39.
Take care that the tyre does not slip underneath the tool.
Positioning the bead breaker
disc (fig.40)
A - Lower the bead breaker disc
until it is level with the well of the
rim and make enough room for the
clamp to be inserted.
Artiglio 500 User Manual
)
NOTICE
A
A
B
B
38
39
A
40
49
UK