Corghi Artiglio 500 Manuel D'utilisation page 30

5 Lower bead-breaker disk penetration control valve
6 Bead-breaker arm simultaneous forward/reverse movement control valve
7 Moving tool head mounting/demounting control valve
4.4.b. SWING CONTROL AND PRESSURE GAUGE PANEL
(Fig. 14)
Wheel pressure gauge
1
2 Deflation button
3 Tool arm opening control valve
4.4.c. PEDAL UNIT (Fig. 15)
1 - Inflation pedal
2 - Turntable rotation pedal
The pedal has 4 different operating positions, cor-
responding to 4 different rotation speeds:
• Pedal raised (unstable position): slow anticlock-
wise rotation. If the pedal is kept raised for more than
4 seconds, rotation gets faster (always anticlockwise).
• Pedal in the rest position (stable position): turntable stopped.
• Pedal gently pressed downwards (unstable position): slow clockwise rotation.
• Pedal pressed entirely downwards (unstable position): fast clockwise rotation.
4.4.d. WHEEL LIFTER CONTROL PEDAL (Fig. 16)
1 Wheel lifting pedal
2 Wheel lowering pedal
30
1
1
Artiglio 500 User Manual
2
1
3
14
2
15
2
16