Corghi Artiglio 500 Manuel D'utilisation page 51

move the clamp (Fig. 41b).
E - When mounting is complete, raise the bead breaker disc
D
F - Move the bead breaker unit to the rest position
5.7. "EXTRAORDINARY" MOUNTING
PROCEDURE
- One variation of the mounting procedure explained
above may be adopted in case of rims with very
small or non-existent drop centre (fig.42a). In these
exceptional cases, the mounting procedure can be
facilitated by using a variant of the normal
procedure.
- The first bead is mounted in the usual
way. To mount the second bead, position
the mobile tool as during the demounting
search stage (fig.42b).
- This reduces the stresses, leaving more
space for the tyre. The following operations
illustrated from fig.41a onward remain
unchanged.
5.8. APPROVED UHP AND RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For this type of tyre please refer to the instructions in the manual prepared by WDK
(German Tyre Industry Association).
Artiglio 500 User Manual
(Fig. 41b).
E
E
41b
A
42a
A
UK
42b
51