Corghi Artiglio 500 Manuel D'utilisation page 39

Lower bead breaking
A - Pre-load the bead-breaker disk by means of the control
crushing by about 5 mm).
C
B - Operate the disk penetration control
then start wheel rotation
same time lowering the bead-breaker disk control
C - Complete at least one full turn to achieve bead-
breaking. It is best to grease the rim bead during
rotation (Fig. 28a).
D - Return the bead-breaking unit down
With this control, bead-breaker disk penetration is reset.
D
Artiglio 500 User Manual
B
A
(Fig. 28b) while at the
(Fig. 28c).
D
(Fig. 28a) (pre-loading with tyre
A
B
and
.
D
28c
28a
B
26b
39
UK