Publicité
Les langues disponibles
Les langues disponibles
Avoid personal injury. Carefully read, understand and follow all instructions.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in an accident.
2. Tyres and Rims that are not the same diameter are "mismatched". Never attempt to mount
or inflate any tyre and rim that are mismatched. For example, never mount a 16" tyre on a 16.5"
rim (or vice versa). This is very dangerous. A mismatched tyre and rim could explode, resulting
in an accident.
3. Never exceed the bead setting pressure (gauge on hose) pro-
vided by the tyre manufacturer, as stated on the sidewall of the tyre.
4. Never place your head or any part of your body over a tyre
during the inflation process or when attempting to seat beads.
This machine is not intended to be a restraining device for
exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating, never
lean over.
During this operation, noise levels assessed at 85 dB(A) may occur.
Wear hearing protection devices.
EXPLOSION HAZARD. An exploding tyre and rim may be propelled upward and
outward with enough force to cause serious injury or death.
Do not mount any tyre unless the tyre size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tyre are defective or damaged.
This tyre changer is not a safety device and will not restrain exploding tyres and rims.
Keep the area clear of bystanders.
5.9.b. INFLATING TYRES
1. Make sure the wheel on which the tyre is fitted is
securely clamped on the turntable by the centring
handle (Fig. 43a).
2. Make sure the tool head, upper and lower bead
breaking units, and if possible are in the rest posi-
tion (see Figs. 43b).
Artiglio 500 User Manual
WARNING
WARNING
DANGER
UK
43a
53
Publicité
