Corghi Artiglio 500 Manuel D'utilisation page 36

5.3.DEFLATING THE
TYRE
Remove valve core to fully
deflate the tyre (Fig. 24).
5.4. BEAD BREAKING
Bead breaking is well known to be a dangerous operation. It must be carried out
in accordance with the instructions below.
Upper bead-breaker positioning.
A - Lower the upper bead-breaker unit from idle position to operating position by means
of the lever (Fig. 25a).
B - Move the disk close to the rim by means of the button
(Fig. 25b).
With this operation, the two arms are moved together. Make sure therefore that the
lower arm is in idle position, fully down.
36
WARNING
A
WARNING
A
25a
and then lever
Artiglio 500 User Manual
24