Corghi Artiglio 500 Manuel D'utilisation page 34

Clamping the wheel on the turntable (fig.20)
A - Fit the clamping device into the drop centre of the wheel.
B - Turn clockwise the device for correct engagement with the turntable.
C - By hand, move the centring cone into pos. on the rim by moving the retainers 1.
D - Tighten the clamping device by turning the handles 2 clockwise.
A
C
See the section "TABLE FOR USING CENTRING AND CLAMPING ACCESSORIES
ACCORDING TO RIM TYPE" in this manual.
34
1
NOTICE
B
2
D
Artiglio 500 User Manual
2
20