Corghi Artiglio 500 Manuel D'utilisation page 47

Removal completed
A - After completing
removal, lower the
bead-breaker disk
(Fig. 35a).
B - Open the tool head arm
35b) and demount the tyre (Fig. 35c).
Any noise heard when the tool head engages with the tyre is normal. The noise is
made by the mechanical return of the tool and not because the tool has hit the rim.
Even if the tool does touch the rim as the tyre is engaged, this will not damage the
rim in any way. The pressure applied is very low.
Artiglio 500 User Manual
A
(Fig.
35c
NOTICE
A
35a
B
B
35b
UK
47