Corghi Artiglio 500 Manuel D'utilisation page 26

mounting where excessive lubricant has been applied and/or where tyres are combined with unusual rims
- A lifting unit with pneumatic pedal control for loading and unloading the wheel from
work position
Thanks to this machine, the following goals are also achieved:
- Reduction of the physical effort on the part of the operator
- Protection of the rim and tyre
Each machine has a data plate Fig. 9, with information about the machine and some
technical data.
As well as the manufacturer's details, the plate indicates:
Mod. - Machine model;
V - power supply voltage in Volts;
A - Input voltage in Amperes;
kW - Absorbed power in kW;
Hz - Frequency in Hz;
Ph - Number of phases;
bar - Operating pressure in bar;
Serial No. - Machine serial number;
ISO 9001 - Certification of the company's Qual-
ity System;
CE - EC marking.
4.1. OPERATOR POSITION
Figure 10 shows the operator's positions during the vari-
ous work phases:
A Wheel lifter operations
B Bead breaker, tyre demounting and mounting, infl-
atin area
4.2. OVERALL DIMENSIONS
• Length .............................................................................................................. A = 1700 mm
• Width ............................................................................................................... B = 1000 mm
• Width (with wheel lift) ................................................................................. B1 = 1290 mm
• Max width when fully open ......................................................................... B2 = 1580 mm
• Height max ...................................................................................................... H = 2100 mm
26
42015 - Correggio (RE) Italy
Mod.
V
Code
A
kW
X-XXXXXXXX/XX - XX
Hz
Serial N.
Ph
bar7psi
Port.max
A
Artiglio 500 User Manual
ISO9001
QUAL. SYS. CERTIFIED
ANNO DI COSTRUZIONE /
MANUFACTURED
9
XXXXXXXXX
B
10