Corghi Artiglio 500 Manuel D'utilisation page 20

Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.
2.1. UNPACKING
Remove the upper part of the packing and make sure the machine has not been damaged
during transportation.
3. HOISTING/HANDLING
Take the utmost care when unpacking, assembling, hoisting and installing the ma-
chine as described below.
Failure to observe these instructions can damage the machine and compromise the
operator's safety.
Before removing the machine from the pallet, make sure the items shown below
have been removed from the pallet.
3.1. INSTALLATION
- Remove the top part of the
cardboard packaging. Make
sure that the machine has not
been damaged in transit, and
identify the points at which
it is anchored to the pallet
(fig. 4), ready to remove the
machine.
- The machine comprises five
main sections (fig.5):
1. Body with pedal unit and
turntable.
2. Column with bead breaking
unit and tool arm.
3. Air tank (T.I. version only).
4. Wheel lift.
5. Bead presser (Optional).
6. Accessories box (see Fig. 4).
20
NOTICE
WARNING
NOTICE
6
Artiglio 500 User Manual
4