Corghi Artiglio 500 Manuel D'utilisation page 48

5.6. MOUNTING
EXPLOSION HAZARD. Always check that the tyre/rim combination is correct in terms
of compatibility (tubeless tyre on tubeless rim, tube type tyre on tube type rim) and
geometrical size (keying diameter, cross-section width, Off-Set and shoulder profile)
before mounting.
AVOID PERSONAL INJURY OR DEATH.
Also check that rims are not deformed, that their fixing holes have not become oval, that
they are not encrusted or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
Preparing the tyre
(Fig. 36)
A - Grease both the
tyre beads.
B - Place the tyre on
the rim.
Positioning the tool head (Fig.37)
A - Operate control 1 to move the tool head into the
working position.
The tool is already in the correct position for mounting
the tyre, unless the type of rim has been changed.
48
WARNING
A B
Artiglio 500 User Manual
36
A
A
37