Corghi Artiglio 500 Manuel D'utilisation page 42

Demounting the top bead
A - Operate control
to prepare
for the subsequent
demounting (Fig.
31a) (this must
be done with the
wheel at a standstill
and not rotating).
B - Check that the bead of the tyre has not slipped
back into the rim on the upper side. If necessary, use
a clamp and/or bead presser for assistance (fig.31b).
C - Now, and only
now, operate the
pedal until
the bead is com-
pletely demounted
(Fig. 31c).
42
A
A
C
C
31a
31b
31c
Artiglio 500 User Manual
A