Corghi Artiglio 500 Manuel D'utilisation page 52

5.9. TYRE INFLATION
5.9.a. SAFETY INDICATIONS
The use of inflation devices (e.g. guns) connected to power sources outside of the
machine is not permitted.
Always comply with national safety regulations as they could be more restrictive than
what is indicated in the manual, according to the principle that a more restrictive
standard takes precedence over the less restrictive one.
If tires being mounted require more than the
tire manufacturer's maximum bead seating
pressure and , the wheel should be removed
from the tire changer, placed in an inflation
cage, and inflated per manufacturer's instruc-
tions.
Verify that both upper and lower tyre beads and the rim bead seat have been properly
lubricated with an approved mounting paste.
Safety goggles with plain lenses and safety footwear must be worn.
Lock the rim on the turntable during inflation.
Remove the valve stem core if not already done.
Connect the inflation hose to the valve stem.
Step down partially on the pedal to inflate the tyre and seal beads with the inflation hose.
Frequently stop to check bead seating pressure on the gauge.
52
DANGER
DANGER
NOTICE
DANGER
Artiglio 500 User Manual