SWINGARM
3. Install:
• Collar 1
To connecting rod 2.
NOTE:
Apply the molybdenum disulfide grease on the
collar and oil seal lips.
4. Install:
• Connecting rod 1
• Bolt (connecting rod) 2
• Plain washer 3
• Nut (connecting rod) 4
To relay arm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
• Relay arm 1
• Bolt (relay arm) 2
• Plain washer 3
• Nut (relay arm) 4
To swingarm.
NOTE:
• Apply the molybdenum disulfide grease on
the bolt circumference and threaded portion.
• Do not tighten the nut yet.
5 - 57
CHAS
80 Nm (8.0 m · kg, 58 ft · lb)