Publicité
VALVES AND VALVE SPRINGS
ASSEMBLY AND INSTALLATION
1. Apply:
2. Install:
NOTE:
• Make sure that each valve is installed in its
original place, also referring to the painted
color as follows.
• Install the valve springs with the larger pitch
c facing upward.
d Smaller pitch
3. Install:
NOTE:
While compressing the valve spring with a
valve spring compressor 1 install the valve
cotters.
4. To secure the valve cotters onto the valve
CAUTION:
Hitting the valve tip with excessive force
could damage the valve.
4 - 44
• Molybdenum disulfide oil
Onto the valve stem and valve stem seal.
• Valves 1
• Valve spring seats 2
• Valve stem seals 3
• Valve springs 4
• Valve spring retainers 5
Intake (middle) a: blue
Intake (right/left) b: gray
Exhaust: not paint
• Valve cotters
Valve spring compressor:
YM-4019/90890-04019
stem, lightly tap the valve tip with a piece of
wood.
ENG
New
Publicité
