Advanced Tuning; Mechanical Lowering - Reely 1:8 GP Buggy Ultra Sonic 4WD RtR Notice D'emploi

e) Advanced tuning
Setting the Differentials
The differentials of the vehicle are filled with grease. The viscosity of the grease blocks the differential, which is
suitable for most terrains and conditions.
By exchanging the grease against highly viscose silicone differential oil the blocking effect can be modified. The higher
the viscosity, the higher the blocking effect.
• If the model swerves in bends when loaded, you can loosen the rear differential or lock the front one.
• If the model understeers when loaded, lock the rear differential or loosen the front differential.
You can select between silicone oil with a viscosity of 1000 (small blocking effect) up to 50000 (high locking effect).
Attention!
We only recommend exchanging the transmission grease to experienced users who know their model and
have adequate technical skills for taking out and disassembling the differentials.
Setting the Toe-in of the Rear Wheels
To set the toe-in of the rear wheels the toe-in block has to be exchanged.
To do so, pull the E-rings from the axles of the lower transverse links. If you exchange the toe-in block with another one
with a greater hole distance, the transverse links are no longer parallel to the longitudinal axis of the vehicle, but at an
angle.
The alignment angle of the rear wheels changes accordingly.
Ackermann Effect
To adjust the progressivity of the steering angle of the wheel
on the inside of the curve (Ackermann effect), the steering
links can be reset to other steering points both in the steering
arms and in the steering plate.

Mechanical lowering

For lowering the chassis, it is also possible to reduce the
rebound clearance mechanically. To do so, one screw each
can be screwed in from the top into the bottom transverse
links, supporting against the chassis.
68
2