Corghi EXACT BlackTech X Plus Manuel D'utilisation page 62

position for the steering lock.
Tilting positioning in the predefined
position for the adjustment.
Tilting positioning in the 1st auxiliary
position.
Tilting positioning in the 2nd auxiliary
position.
Click on the EXIT icon to return to the initial page.
Initial page
To access this function from the rest of the pro-
gramme select the
Select the wheel alignment mode
procedure and start work
restarts the previous job.
and
"demo" mode, for which the targets are not
required.
ATTENTION: Some selectable programs can
not be active or activable.
The "demo" mode is indicated by the
symbol in the status bar.
and
maintenance utilities, and wheel aligner cus-
tomisation.
ends execution of the program, shuts
down all the applications open and switches off
the wheel aligner.
WARNING
before switching off the wheel aligner, always
shut down the active programs and operating
system correctly.
62
icon or the F9 key.
and
.
enable and disable the
access the service and
(3) Databank (Fig. 34)
/ Job record(Fig. 57)
To access this function from the rest of the pro-
gramme select the
Select the vehicle from the databank, using the
keys in the following way: ↓, ↑, PAGE↓, PAGE↑,
←, → and the letter keys to scroll through the
trademarks and model descriptions;
↵ to confirm the vehicle selection.
During selection, the vehicle code is shown in
the status bar.
The model of the vehicle selected will be loaded
in the "Vehicle name bar", which contains the name
of the market set while selection is in progress. All
the cars and vans up to and including 3500 kg are
shown on the screen.
recalls the market selection. The screen
only shows the vehicles on sale on the selected
market. allows selection of the reference
databank. The vehicles belonging to the user
databank are marked by the
displays the vehicle descriptions sup-
plied by the manufacturers for wheel alignment
operations.
displays the commercial descriptions
of the vehicles.
accesses compilation of the job record.
If the user set-up field "Alignment procedure
customisation / vehicle selection mode" = "Job
record" the data input form will be displayed.
Selection of the vehicle from the databank can
be selected from the record.
Different job record options are available in the
set-up, "Job record / type" field.
Operator's manual EXACT BlackTech X Plus
icon or the F8 key.
symbol.