Shipping, Storage And Handling; Machine Shipping Conditions; Machine Storage And Shipping Specifi Cations; Handling - Corghi Wind-twist Manuel D'utilisation

SHIPPING, STORAGE AND HANDLING

The Wind-Twist machine must be shipped in its original packaging and kept in the
position indicated on the packing.
Packaging dimensions (fi g. 1):
- width 920 mm
- depth 1140 mm
- height 1750 mm
Machine storage and shipping specifi cations
- Temperature: -25°C to +55°C.
WARNING
To avoid damage do not place other articles on top of the packages.
To move the packing, insert lift forks into the slots in the base of the packing unit (pal-
let) (Fig. 2).
Refer to the section on LIFTING AND HANDLING for instructions on how to move the
machine.
ATTENTION!
Keep the original packing; it could be useful in the future for machine transfer.

UNPACKING/ASSEMBLY

WARNING!
The unpacking, assembly, lifting and installation procedures which follow should be
performed according to instructions. Failure to comply with these instructions could
damage the machine and put the operator at risk.
Remove the upper part of packing from the machine. Check the machine was not dam-
aged during shipping and identify pallet attachment points .
At this point the machine is ready for installation.
WIND-TWIST operator's manual

Machine shipping conditions

Handling

GB
27