Corghi EXACT BlackTech X Plus Manuel D'utilisation page 59

Customer: In the management function job
records are sorted by customer.
Vehicle registration number: In the man-
agement function job records are sorted by
vehicle registration number.
Operator: In the management function job
records are sorted by operator.
Order number: In the management function
job records are sorted by order number.
➥ Customer correspondence
No.
➥ Enable modifications
Yes: allows modification of the adjustment
data of a job saved in the memory.
No:
Shows all pages
Yes: For entering all customer and vehicle
data.
No: Only the essential customer and vehicle
data is requested.
Alignment procedure
➥ Vehicle weight procedure enabling
YES: vehicle weight procedure enabled.
NO: vehicle weight procedure not enabled.
➥ Lift test
YES: lift test procedure enabled.
NO: lift test procedure not enabled.
➥ Vehicle selection
Always activated: Selection of vehicle from
databank always activated.
On request: Selection of vehicle from data-
bank activated on request.
➥ Vehicle selection mode
Databank: Selection of vehicle from data-
bank, job record compilation on request.
Job record: compilation of job record with
activation of vehicle from databank if neces-
sary.
➥ Rim diameter
Always: If toes are set in millimetres or inches,
the step for input of the rim diameter is always
activated.
On request: If toes are set in millimetres or
inches, the step for input of the rim diameter
is activated either by the operator or automati-
cally if the reference diameter is not available
in the databank.
Operator's manual EXACT BlackTech X Plus
➥ Caster measurement steering lock
Always activated: Caster measurement steer-
ing lock always activated.
On request: Caster measurement steering
lock activated on request.
If adjustable: Caster measurement steering
lock only activated if at least one of the angles
that can be measured is adjustable (caster,
king pin, steering angle difference at 20° and
maximum steering angle).
➥ Rear axle
Always activated: Rear axle adjustment always
activated.
If adjustable: Rear axle adjustment only ac-
tivated if at least one of the angles that can
be measured is adjustable (half toe, camber,
total toe, setback).
➥ Second steering
Always activated: Caster measurement sec-
ond steering lock always activated.
Automatic skip: Caster measurement second
steering lock not activated.
If adjustable: Caster measurement second
steering lock only activated if at least one of
the angles that can be measured is adjustable
(caster, king pin, steering angle difference at
20° and maximum steering angle).
➥ Measurement assistant
YES: The measurement help animations are
shown.
No: The measurement help animations are
not shown.
➥ 1/2 axle alignment
YES: 1 or 2 axle alignment selection procedure
active.
NO: 1 or 2 axle alignment selection procedure
not active.
➥ Data summary
Always activated: The data summary is always
displayed.
On request: The data summary is only dis-
played if activated with the appropriate icon.
➥ King pin caster
YES: The values are calculated and displayed.
NO: The values are not calculated and dis-
played.
EN
59