Keysight U3606B Mode D'emploi page 94

2 Operation and Features
Remote interface operation:
– The TRIGger:SOURce BUS command selects the bus trigger source.
– The MEASure? command overwrites the bus trigger and triggers the U3606B
– The READ? command does not overwrite the bus trigger, and if selected,
– The INITiate command only initiates the measurement and needs a trigger
Refer to the U3606B Programmer's Reference for the syntax and complete
descriptions for these commands.
94
and returns a measurement.
generates an error. It will only trigger the instrument and return a
measurement when the IMMEdiate trigger is selected.
(*TRG command) to make the actual measurement.
Keysight U3606B User's Guide