Keysight U3606B Mode D'emploi page 22

1 Introduction
Autoranging enabled
DC voltage measurement
– For subsequent power cycles, the U3606B returns to the last power-off state
NOTE
– If the self-test is unsuccessful, Error is displayed on the right side of the
– A more extensive self-test is also available from the Utility menu.
22
Push the power switch to turn on the
instrument. The front-panel display
illuminates while the U3606B performs its
power-on self-test.
The image above shows the U3606B state after the initial power-up.
– DC voltage measurement function with autoranging enabled, and
– Constant voltage (CV) operation with the output disabled (on
standby).
by default. You can change this behavior in the Utility menu.
display. Press [Shift] > [Utility] to read the error number in the Utility menu.
Constant voltage operation
Output on standby
Keysight U3606B User's Guide
4
5