Keysight U3606B Mode D'emploi page 123

Adjust the frequency, duty cycle, or pulse width values and save the changes
Use the arrow keys to change the value.
– Press [ ] or [ ] to step through the available frequencies.
– Press [ ] or [ ] to step through the available duty cycle (or pulse
width) values.
Note: To adjust the frequency value, the duty cycle or pulse width
values must be shown on the display.
– Pressing [
NOTE
– While adjusting the amplitude, duty cycle, and pulse wid th values you can
– The square-wave amplitude is limited by the range selected. Press
– Changing the square-wave frequency value will affect the square-wave duty
Keysight U3606B User's Guide
] again will save the changes, and display the next
square-wave parameter (while still in the edit mode).
also press [Shift] > [Exit] to exit the edit mode.
[Shift] > [Range] to select an appropriate range. You can only select a range
when the output is disabled (the SBY annunciator is illuminated).
cycle and pulse wid th values as they are inter-related.
DC Power Supply Operation
4
o exit the ed it mod
3
5
123