Keysight U3606B Mode D'emploi page 74

2 Operation and Features
Probe the test points and read the display
If the frequency signal measured is below 20 Hz, you must manually set the
CAUTION
range of the AC voltage or AC current measurement to acquire a stable
reading.
– The range and resolution of the frequency, pulse width, and duty cycle
NOTE
– The AC voltage or AC current measurement display will flash briefly before
74
In this example, we obtain a duty cycle measurement of 54.321%, with
autoranging enabled and 5½ digit resolution selected by default.
measurement follows the configuration of the AC voltage or AC current
measurement (dependent on the path chosen).
the frequency measurement display is shown.
Keysight U3606B User's Guide
5