Keysight U3606B Mode D'emploi page 159

Press [ ] or [ ] to switch between "YES" and "no". Select "YES" to enable the
output protection state or "no" to disable the output protection state.
Adjusting the soft start output
The U3606B allows you the option of soft starting the DC power supply output.
You can select a value from 1 to 10000 steps for the soft start output. This feature
is useful to start a DC motor. The factory default soft start step value is 1.
Press [ ] or [ ] to change the soft start step value (1 to 10000).
For a successful fast starting DC motor (1 step), you must first disable the output
NOTE
protection
(autoranging). Selecting longer rising steps such as 30 to 50 steps can reduce
the starting current of the DC motor.
Selecting a dBm reference resistance value
Keysight U3606B User's Guide
(page 158) and change the constant voltage range to S1S2
System-Related Operation 4
159