Keysight U3606B Mode D'emploi page 132

3 DC Power Supply Operation
Selecting a Range
You can allow the U3606B to automatically select the range using autoranging or
select a fixed range using manual ranging.
Key
Table 3-6 Available ranges for DC power supply functions
Range
S1 (30 V/1 A)
S2 (8 V/3 A)
S1m (30 V/100 mA)
S2m (1000 mV/3 A)
S1S2 (autoranging)
[a] Available ranges affect sweep functions (ramp and scan), OCP, and OC values.
[b] Available ranges affect sweep functions (ramp and scan), OVP, and OV values.
– The S1 range is selected by default. You cannot change the range when the
NOTE
– The protection and limit values will always be set to the previous saved value
132
Description
Press [Shift] > [Range] to toggle between the available ranges.
CV
√
√
-
√
√
output is enabled (OUT). The output should always be on stand-by (SBY)
before the range or output function can be changed.
with respect to the range selected when the range is changed.
[a] [b]
CC
√
√
√
-
√
Keysight U3606B User's Guide
Square wave
√
√
-
-
√