Keysight U3606B Mode D'emploi page 4

Safety Considerations
Read the information below before using this instrument.
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards for design, manufacture, and intended use of the instrument. Keysight
Technologies assumes no liability for the customer's failure to comply with these
requirements.
– Do not exceed any of the measurement limits defined in the specifications
WARNING
– Do not use the device if it is damaged. Before you use the device, inspect
– Always use the device with the cables provided.
– Observe all markings on the device before establishing any connection.
– Turn off the device and application system power before connecting to
– When servicing the device, use only the specified replacement parts.
– Do not operate the device with the cover removed or loosened.
– Use only the power adapter provided by the manufacturer to avoid any
– To avoid damaging the device, do not connect positive output terminals
– The input voltage range for the instrument is 100 to 240 VAC. Mains
4
to avoid instrument damage and the risk of electric shock.
the casing. Look for cracks or missing plastic. Do not operate the device
around explosive gas, vapor, dust, or wet environments.
the I/O terminals.
unexpected hazards.
( ) with negative input terminals (LO); or positive input terminals
(V, , , ) with negative output terminals (
supply voltage fluctuations are not to exceed ±10% of the nominal supply
voltage.
).
Keysight U3606B User's Guide