Keysight U3606B Mode D'emploi page 154

4 System-Related Operation
Configuring the scan signal parameters
Press [Voltage] or [Current] if you wish to configure the scan signal parameters
for CV or CC output.
Select an appropriate output range by pressing [Shift] > [Range]. The scan signal
amplitude end position is limited by the range selected.
Table 4-2 Scan signal parameters
Scan signal
Items
[a]
Range
[b]
Amplitude end position
Number of steps
Dwelling time
[a] Range S1S2 (autoranging) is not supported for the Scan function.
[b] Amplitude start position is fixed at 0 (V or A) by default.
154
Constant vol tage
S1 S2
0 V to 0 V to
31.500 V 8.400 V
Output
S2m S1
0 V to 0 A to
1050.0 mV 1.0500 A
1 step to 100 steps
1 s to 99 s
Constant current
S2
0 A to
3.1500 A
Keysight U3606B User's Guide
S1m
0 A to
105.00 mA