Keysight U3606B Mode D'emploi page 144

4 System-Related Operation
Utility Menu Summary
The Utility menu items are summarized in the table below. For further
explanations on the various items in the Utility menu, see the respective menu
item headings.
Table 4-1 Utility menu summary
Item Available settings
Error nonE
dAtA NNNNN
LoG
StoP
FiLE
rHoLd t - NNN %
144
(–)Er.NNN
NNNNN s
Cont StArt
nH - N.N %
Description
– Review the last recorded error message (up to
20 error messages).
– Review all the recorded error messages to
clear the Error annunciator.
– Set the data logging loop number (NNNNN)
from 1 to 29000.
– Set the data logging interval time (NNNNN s)
from 1 s to 99999 s.
– Select "StArt" to start the data logging
operation (this operation overwrites any
previously logged data).
– Select "StoP" to stop the data logging
operation.
– Select "Cont" to resume a data logging
operation from where it was last stopped.
– Set the refresh hold variation (t - NNN %) in
percentage. When the variation of the
measuring value exceeds the preset setting,
the refresh hold will be ready to trigger.
– Set variation to "oFF" to enable data hold
mode.
– Set the refresh hold threshold (nH - N.N %) in
percentage for voltage, current, and
capacitance measurements. The reading value
will not be updated when the reading falls
below the threshold value.
Keysight U3606B User's Guide
Link
page 147
page 148
page 148
page 149