Keysight U3606B Mode D'emploi page 145

Table 4-1 Utility menu summary (continued)
Item Available settings
oF
SMoth
FC-N.N %
NNNN
CV
S1/S2/S2m
SCAn
NN.NNN V
CV
S1/S2/S2m
rAMP
NN.NNN V
triP YES
Keysight U3606B User's Guide
on
CC
S1/S1m/S2
N.NNNN A NNN-NN s
CC
S1/S1m/S2
N.NNNN A NNNNN
no
System-Related Operation
Description
Select "oF" to disable the smooth function, or
"on" to enable the smooth function.
– Set the fluctuation count from 0.0 % to 9.9 %.
– Set the count to 0.0 % to disable the
fluctuation function.
Set the number of points from 2 to 1999.
– Press [Voltage] to select scan setup for CV.
– Press [Current] to select scan setup for CC.
Press [Shift] > [Range] to toggle between
range S1 (30 V/1 A), S1m (30 V/100 mA), S2
(8 V/3 A), or S2m (1000 mV/3 A)
– The increment of each step will be the
amplitude end position (NNNN.N mV/
NNN.NN mA) divided by the number of steps
(NNN).
– Set the scan dwelling time (NN s) from 1 s to
99 s.
– Press [Voltage] to select ramp setup for CV.
– Press [Current] to select ramp setup for CC.
Press [Shift] > [Range] to toggle between range
S1 (30 V/1 A), S1m (30 V/100 mA), S2 (8 V/3 A),
or S2m (1000 mV/3 A)
– The increment of each step will be the
amplitude end position (NNNN.N mV/
NNN.NN mA) divided by the number of steps
(NNNNN).
– The ramp dwelling time will be fastest of
output capability (typically ~100 ms per step).
– Select "YES" to enable the output protection
or "no" to disable the output protection.
– The factory default for the output protection
state is "YES".
4
Link
page 151
page 154
page 156
page 158
145