Keysight U3606B Mode D'emploi page 149

If "StArt" is selected, the U3606B will exit the Utility menu immediately and begin
the data logging operation. The LOG annunciator turns on for the entire duration
of the data logging operation.
– Selecting "StArt" overwrites any previously stored data. After the data
NOTE
– The data logging operation will stop automatically when it is completed or
– To download the stored data, you will need to connect a PC to the U3606B
Enabling refresh hold
Press [ ] or [ ] to change the refresh hold variation (001% to 100%).
Press [ ] or [ ] until the cursor is position on the refresh hold threshold (nH -
N.N%). Press [ ] or [ ] to change the refresh hold threshold (0.0% to 9.9%) for
voltage, current, and capacitance measurements.
Keysight U3606B User's Guide
logging operation has started, you will need to press [Local] if you want to
stop the data logging operation.
when the U3606B's memory is full.
via remote operation. See the U3606B Programmer's Reference for more
details.
System-Related Operation 4
149