Keysight U3606B Mode D'emploi page 85

MinMax
The MinMax operation stores the minimum and maximum values, the average,
and the number of readings during a series of measurements. From the front
panel, you can view the following statistical data for any set of readings: average
or mean (Avg), maximum (Max), minimum (Min), or present reading (MaxMinAvg).
– This math operation applies to all measurement functions except continuity
NOTE
– The stored statistical data are cleared when statistics are enabled, when the
– The average function can be restarted by pressing [MinMax] for more than
Enable the MinMax function
Keysight U3606B User's Guide
and diode test.
CALculate:FUNCtion
when the power is turned off, after a Factory Reset (
Instrument Preset (
SYSTem:PRESet
function change.
one second.
command is sent while the
command), or after a measurement
Operation and Features
CALCulate:STATe
command), after an
*RST
To d isable the MinMax function
2
is ,
ON
85