Keysight U3606B Mode D'emploi page 30

1 Introduction
Table 1-2 Rear panel descriptions
Legend
1 AC inlet
2 AC line fuse
3 Ventilation fan
4 Kensington security slot
5 GPIB interface connector
6 Chassis ground lug
7 Rear output terminals
8 Short bars
9 USB interface connector
10 Serial number
30
Description
Connects the AC power line — plug the power cord firmly in here
To maintain protection, replace this fuse only with a fuse of the specified type and rating
Ventilation fan to exhaust heat and air from the instrument
Anti-theft system using Kensington locks
GPIB (IEEE-488) connector physical interface
Connect to earth ground or to unit chassis to eliminate noise caused by ground loops
Positive and negative terminals for remote sense
Shorts the rear output (+ and –) and sense (+S and –S) terminals
Type-B USB connector physical interface
Indicated the instrument's serial number
Keysight U3606B User's Guide