Lenze 8200 Vector Instructions De Montage page 121

7
Commissioning
Using the keypad E82ZBC − Parameter setting
Menu structure
All parameters for controller setting or monitoring are saved in codes. The codes are
numbered and labelled in the documentation with a "C". Some codes store the parameters
in numbered subcodes", so that a clear parameter setting is ensured (e. g.: C0517 User
menu).
The codes are described in detail in the system manual of the drive controller.
For easy operation the codes are divided in two groups:
The menu user
l
– is active after every mains switching or keypad attachment during operation.
– contains all codes for a standard application with linear V/f characteristic control
(Lenze setting).
– can be modified as required under C0517.
The menu all
l
– contains all codes.
– shows a list of all codes in ascending order.
120
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EDK82EV113 DE/EN/FR 8.1
L