Toyota 02-8FGF15 Manuel De L'opérateur page 77

01_A5028-0EA04_En.fm Page 84 Monday, June 27, 2011 10:08 AM
Closing
1. Lift up the engine hood and press the
hood damper lock to release the lock.
2. Close the engine hood gently, and press
down on it until hearing a clicking
sound.
Caut ion
Working on the engine without a safety
locking of the hood may be dangerous.
Removing LPG tank
Note:
To remove your refillable tank you can
screw off the collar or remove the bracket.
Installing the tank
For installation and maintenance of the refillable tank, please follow the tank
manufacturer's instructions (provided with the truck).
CAR RADIO
Starting
The car radio starts when ignition key is on position ON.
Stop
The car radio stops automatically when the ignition key is on position OFF.
For the use and the maintenance of the car radio, please follow the manufacturer's
instructions (provided on the truck).
en-76
(1)
(1) Push
Warning
Stop the engine as explained in
"parking for a long time" section.
ENGINE CUT-OFF TIMER
Your truck is equipped with an engine cut-off timer device. This system stops various
functions on the truck after the absence of the driver during a determinated period.
There are two releases of the device (V2 or V3 on the box) with the same functioning.
Functions stopped with the system:
- Engine - Hourmeter
- Front headlights - 3 way catalytic
- Rear lights
- Horn
- Rear working light
- DPF instrumentation
- Turn signal - Instruments lightening
- Flashing / rotary beacon - SAS system
If Steel cabin option:
- Front and rear wiper - Car radio
- Windscreen washer pump
- Heater turbine
- Room lamp - Cooler turbine
Time setting
The device starts the temporization as soon as
the driver leaves the seat (the sensor is in
the seat).
1. Take off the cover using a little flat
screwdriver in position (1), do not open
by an other way .
2. Locate the time setting (2) and check the
connections of the harness (3)/(4).
(3)
MODEL N°
V2 or V3
(1)
NO
MIN MAX
(2)
(4)