Toyota 02-8FGF15 Manuel De L'opérateur page 37

01_A5028-0EA04_En.fm 36 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
(3)
(2)
(1)
(1) Seat slide lever
(2) Recliner adjust knob
(3) Seat belt
en-36
General Export specification seat
(Option)
The operator's seat belt is provided for your
safety.
1. Seat slide lever
Pull the slide lever to the right to adjust
the back-and-forth position of the seat.
The seat is secured in position when you
release the lever.
2. Recliner adjust knob
Turn the knob to adjust the seat's angle of
recliner.
Forward ............ Turn the knob counter-
clockwise
Backward ....... Turn the knob clockwise
Caution Caution
• The seat position must be adjusted
before starting the vehicle.
• After adjustment, lightly shake the seat
forward and backward to confirm that
the seat is firmly locked in position.
Seat belt
To fasten your seat belt, insert the tab into the
buckle.
You will hear a click when the tab locks into
the buckle. Pull on the belt to make sure the
buckle is securely latched.
Adjust the seat belt length to your size as nec-
essary.
Disconnecting method
Push the release button and pull out the belt
from the buckle.
Caution Caution
• When the operator leaves the seat, insert
the seat belt tab into the buckle.
• Stop the engine when you open the
engine hood.
• When you start the engine, fasten the
seat belt.
(1)
(1) Engine hood lock release lever
Warning
• Buckle up. Your seat belt can reduce the
risk of serious injury or death in case of
a vehicle tipover. Your chances for avoid-
ing serious injury or death in a tipover
are better if you stay with the vehicle in
the operator's compartment.
• Always fasten your seat belt when oper-
ating the vehicle. The vehicle can be
tipped over if operated improperly. To
protect operators from the risk of seri-
ous injury or death in the event of a
tipover, it is best to be held securely in
the seat. The seat belt will help to keep
you safely within the vehicle and opera-
tor's compartment.
In the event of a tipover, don't jump,
grip the steering wheel, brace your feet,
lean away from the direction of tipover,
and stay with the vehicle.
Engine hood
Opening
1. Pulling up on the engine hood lock
release lever will release the engine hood
lock, and the engine hood will pop up
slightly.
2. Lift the engine hood.
3. Open the engine hood all the way, then
shake the hood slightly to check that the
hood damper has been securely fastened
before letting go.