Body Components - Toyota 02-8FGF15 Manuel De L'opérateur

01_A5028-0EA04_En.fm 32 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
(1) (2)
(1) Forward
(2) Backward
en-32
D2 pedal (Option)
These pedals are used for foot pedal for travel
shifting, and acceleration.
Forward ................... Step on the left side
of the pedal.
Backward................. Step on the right side
of the pedal.
Each pedal functions as accelerator pedal.
Speed is adjustable by depth of depression.
Note:
• Engine can be started only when the park-
ing brake is applied or your foot is off the
accelerator pedal.
• When the OPS system is activated, the
"stop driving" function can be deactivated
by applying the parking brake pedal or tak-
ing your foot off the accelerator pedal when
you are sitting on the seat.

BODY COMPONENTS

(1)
(1) Adjustment lever
Operator's seat
The operator's seat and seat belt are provided
for your safety.
The seat can be moved back and forth for posi-
tion adjustment while the adjust lever is pulled
upward.
Caution Caution
• Due to the seat switch, the forklift cannot
be driven and the forks cannot be raised
or lowered unless the operator is sitting
on the seat. Therefore, please sit on the
seat before attempting to operate the
forklift. Moreover, do not operate it with
an object placed on the seat.
• Do not turn on the seat switch by any
method other than sitting on the seat.
Operator Restraint System
A specially designed operator's seat and seat
belt are provided for your safety. Get in the
habit of using the seat belt whenever you sit on
the vehicles.
Caution Caution
Always adjust your seating position before
driving the vehicle.
An operator's manual and operator's manual
for safety operation are located on the rear side
of the seat. If your vehicle dose not have an
operator's manual and operator's manual for
safety operation, please contact (your autho-
rized Toyota dealer) to obtain copies for your
vehicle.