Start Screen - Toyota 02-8FGF15 Manuel De L'opérateur

01_A5028-0EA04_En.fm 16 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
Digital speed meter display
(1)
ODO • TRIP Meter display
Maintenance display
(1) Meter display switch
en-16
DISPLAY SCREEN TABLE
From the standard screen display, pressing the
meter display switch will change the display
between ODO, TRIP, and Maintenance Hour
Meter display screens.
Note:
Always operate the switch panel with your fin-
ger tips and when the vehicle is stopped.

Start screen

When the ignition switch is turned to ON, the
start screen will appear for 1 second.
(1)
(1) Torque converter oil temperature gauge
(1)
(1) Low speed setting switch or down switch
Standard screen
Vehicle speed is digitally indicated in km/h at
the top of the screen. At the bottom of the
screen, torque converter oil temperature is
indicated in a 10-stage level.
ODO • TRIP meter
ODO......... Displays the total distance traveled.
TRIP......... After resetting this function, dis-
plays the total distance traveled
until now.
Note:
• Pressing the low speed setting switch (DX
models with Auto speed control) or the
down switch for more than 2 seconds will
reset the total travel distance.
• Always operate the switch panel with your
finger tips and when the vehicle is stopped.
Maintenance hour meter
Displays the set value and current value of the
maintenance hour meter.
CURRENT...............Displays the current time.
SETTING.................Displays the maintenance
hour time setting.
The maintenance hour meter time setting can
be set between 10-2000 hours. 10-200 hours
setting can be set in 10 hour intervals, and 200-
2000 hours setting can be set in 50 hour inter-
vals.
Note:
To change the time setting, consult your super-
visor or Toyota dealer.